UPCOMING QCO ON TEXTILE GOODS BY MINISTRY OF TEXTILE
BIS ISI CERTIFICATION SERVICES
What is BIS ISI Certification?
The Bureau of Indian Standards (BIS) is the National Certification body of India that issues BIS licenses to manufacturers and importers for various products under voluntary or mandatory certification schemes. BIS certification is a third-party assurance of product quality, consumer safety, and reliability.
BIS certification ensures that a product conforms to relevant Indian Standards and is safe for use in the Indian market. Certain products listed under the Mandatory Product Certification Scheme of BIS must obtain certification before being sold in India.
AN Global Services is an established ISI Certification service provider for both Indian and international manufacturers. We assist in managing the complete process required to obtain ISI Certification for mandatory as well as optional products.
ISI stands for Indian Standards Institute. ISI is the certification scheme under BIS that confirms a product complies with Indian Standards and guarantees safety and quality.
The ISI certificate allows manufacturers to use the ISI Mark, which has been the standards compliance mark for industrial goods since 1955. This mark assures that products meet the standards laid down by BIS.
Several electrical appliances require mandatory ISI marking such as Electric Irons, Room Heaters, Room ACs, Electric Stoves, Freezers, Electric Cables, UPVC Pipes, Rubber & Leather Footwears, Composite Cement, and various chemical products.
More than 536+ products fall under mandatory ISI certification. Without ISI certification, manufacturers are not permitted to manufacture and sell products in India.
BIS is the authorized body to provide the ISI mark through proper inspection, evaluation, testing, and documentation. This process ensures that manufacturers strictly follow the standards and instructions laid down by BIS.
SIGNIFICANCE OF BIS/ISI MARK CERTIFICATION IN INDIA
Market Access
A certified product provides a wider market because it implies better quality along with conformity to safety standards and consumer security. A product with an ISI mark is more trustworthy and credible, hence, enjoys greater demand compared to uncertified products. This ultimately provides wider market access.
Provides Competitive Advantage
An ISI certified product signifies exemplary quality and provides the manufacturer a competitive edge. Consumers prefer certified products over uncertified ones. ISI certification ensures quality, enhances trust, and helps businesses achieve higher revenue by standing out from competitors.
Market Advantages
Having an ISI certificate provides market advantages such as uninterrupted production and easier market acceptance. It confirms that products are manufactured according to prescribed Indian standards, ensuring quality and safety.
Legal Benefit
ISI certification offers legal benefits by allowing manufacturers to produce mandatory listed goods without legal issues. It protects businesses from penalties, fines, and legal actions that may arise due to non-compliance with BIS regulations.
DOCUMENTS REQUIRED TO OBTAIN BIS ISI MARK CERTIFICATE IN INDIA
- The legal identity of the establishment (GST certificate, Partnership Deed, Certificate of Incorporation, etc.).
- Flow-chart process including all the manufacturing processes, information regarding in-process control of each stage, including outsourced stages.
- If applicable, submit the product or component drawing.
- In-house testing report.
- List including information of raw materials used and copies of test certificates of raw materials.
- A layout plan indicating the location of manufacturing machinery or laboratory.
- Details of manufacturing machinery.
- Documents of brand trademark.
- List of quality testing personnel & copies of certificates of qualification of quality control personnel.
- Factory location plan from nearby railway station / airport / landmark along with guidance on how to reach the BIS office.
- List of test equipment.
- Undertaking or declaration (will be provided by us).
PROCESS OF GRANT OF ISI CERTIFICATE
- Step1: Organize the Lab Test Report (LTR) by BIS
- Step2: Filling of Application
- Step3: Preparation of Manual
- Step4: Documentations
- Step5: Inspections by the Department
- Step6: Submission of Test Report & Request for Inspection
- Step7: Closure of Non-Conformity (if any)
- Step8: Get the ISI Marking / Registration
NORMAL PROCESS FOR BIS ISI MARK CERTIFICATION
Normal Procedure (takes 60 – 65 days)
The following steps will take place under normal procedure:
- First, the applicant prepares for BIS certification requirements, including setting up in-house labs and preparing products as per Indian Standards with required documentation.
- Afterwards, the BIS official conducts an inspection of the product along with the factory/industry.
- After inspection, sealed samples are sent for testing at BIS approved laboratories.
- If the product passes all test parameters, BIS issues the ISI certificate within 60–65 days from application submission.
List of Products Covered Under BIS ISI Certification
Select your product category to understand ISI certification requirements, standards, and approval process.
Footwear Products
Mandatory ISI certification for leather, rubber & safety footwear.
Steel Products
ISI marking for steel bars, rods, wires & structural steel.
Furniture & Plywood Products
BIS ISI certification for plywood, boards & furniture items.
Plastic Products
Mandatory ISI marking for plastic pipes & molded products.
Home Appliances
ISI certification for household & electrical appliances.
Concrete Products
BIS ISI marking for cement & concrete construction materials.
Hardware Products
ISI compliance for industrial & building hardware items.
Medical Products
Mandatory ISI marking for medical & healthcare devices.
Chemical Products
BIS ISI certification for industrial & construction chemicals.
Electronics Products
Mandatory ISI marking for electronic & IT products.
ISI Certification Cost in India
The cost of obtaining ISI Certification in India depends on several factors such as the type of product, applicable Indian Standard (IS), number of product variants, testing requirements, and factory readiness. ISI Certification is issued under the BIS Product Certification Scheme (Scheme I), and manufacturers are required to pay certain statutory fees directly to the Bureau of Indian Standards (BIS) along with applicable testing charges.
| S. No. | Cost Component | Amount (INR) | Remarks |
|---|---|---|---|
| 1 | Application Fee | ₹1,000 | One-time fee payable to BIS |
| 2 | Factory Inspection / Audit Fee | ₹7,000 | Payable to BIS for factory audit |
| 3 | Sample Testing Charges | As applicable | Depends on product & BIS-recognized lab |
| 4 | Marking Fee | As per IS | Calculated based on production volume |
Note: In addition to the above government fees, manufacturers are required to invest in setting up an in-house testing laboratory as per the applicable Indian Standard. The cost of testing equipment, calibration, and quality control personnel varies depending on the product category.
Important: The overall ISI Certification cost may vary based on product complexity, number of test parameters, factory preparedness, and inspection timelines. Proper documentation and pre-audit readiness can significantly reduce delays and additional expenses during the certification process.
Time Required to Obtain BIS ISI Mark Certification in India
The time required to obtain ISI Certification in India varies depending on the type of product, applicable Indian Standard (IS), readiness of the manufacturing unit, and completion of testing and documentation requirements. ISI Certification is granted under the BIS Product Certification Scheme (Scheme I) and involves application review, factory inspection, and laboratory testing before the license is issued.
Estimated Overall Timeline: For most domestic manufacturers, the ISI Certification process typically takes around 45 to 60 days, provided the factory setup, in-house testing facilities, and documentation are complete at the time of application.
Factors Affecting ISI Certification Timeline
- Readiness of the manufacturing unit and availability of required machinery and in-house testing equipment.
- Completeness and accuracy of documents submitted with the application.
- Number of product variants and complexity of testing requirements as per the applicable Indian Standard.
- Scheduling availability of BIS officials for factory inspection.
- Turnaround time of BIS-recognized laboratories for sample testing.
Who Needs ISI Mark Certification in India?
ISI Mark Certification is a mandatory quality certification issued by the Bureau of Indian Standards (BIS) for products notified under various Quality Control Orders (QCOs) in India. Any business involved in the manufacturing, import, or branding of such notified products must obtain ISI Certification before selling them in the Indian market. The requirement applies to both domestic and foreign entities to ensure product safety, quality, and consumer protection.
1. Indian Manufacturers
Indian manufacturers producing goods that fall under mandatory BIS certification must obtain an ISI Mark license before manufacturing and selling their products. This includes industries such as electrical appliances, medical products, construction materials, toys, cement, household items, and consumer safety products.
2. Foreign Manufacturers Exporting to India
Foreign manufacturers supplying products to India must obtain ISI Mark Certification through the Foreign Manufacturers Certification Scheme (FMCS). These manufacturers are required to appoint an Authorized Indian Representative (AIR) and comply with Indian Standards to legally export and sell notified products in India.
3. Importers and Traders
Importers and traders dealing with ISI-notified products are responsible for ensuring that the imported goods carry a valid ISI Mark. Importing or selling uncertified products may lead to customs detention, penalties, seizure of goods, or cancellation of import permissions.
4. Brand Owners and Private Label Businesses
Businesses selling products under their own brand name, even if the manufacturing is outsourced, must ensure ISI Certification is obtained. Brand owners are legally accountable for compliance with BIS requirements and product quality in the Indian market.
5. Government Suppliers and Tender Participants
Manufacturers and suppliers participating in government tenders, public sector procurement, and institutional supply contracts are often required to provide ISI-certified products. ISI Mark Certification is a prerequisite for eligibility in many government and PSU tenders.
6. E-commerce Sellers and Online Marketplaces
Sellers listing ISI-notified products on e-commerce platforms must provide valid BIS certification details. Online marketplaces are increasingly enforcing BIS compliance to avoid regulatory action and ensure consumer safety.
Important: Selling, importing, or manufacturing products without mandatory ISI Mark Certification is a punishable offense under the BIS Act, 2016. Non-compliance may result in fines, product seizure, cancellation of licenses, or legal action by regulatory authorities.
Frequently Asked Questions (FAQs) – ISI Certification
What is ISI Mark Certification?
ISI Mark Certification is a quality certification issued by the Bureau of Indian Standards (BIS) that confirms a product complies with the applicable Indian Standard for safety, quality, and performance.
Is ISI Mark Certification mandatory in India?
Yes, ISI certification is mandatory for products notified under BIS Quality Control Orders. Selling or importing such products without ISI certification is a punishable offense.
Who needs ISI Mark Certification?
Indian manufacturers, foreign manufacturers exporting to India, importers, brand owners, and sellers of notified products are required to obtain ISI Mark Certification.
How long does it take to get ISI Certification?
The ISI Certification process generally takes 30 to 60 days, depending on product type, testing requirements, factory readiness, and BIS inspection timelines.
What is the cost of ISI Certification in India?
The cost includes BIS application fee, inspection fee, testing charges, marking fee, and license fee. The total cost varies based on the product and applicable Indian Standard.
OUR CONTRIBUTION IN OBTAINING BIS ISI MARK CERTIFICATE
- We will train you regarding what is ISI Mark and how to obtain it.
- We will check whether a product complies with the BIS standards or not. After reciprocity, the project will move forward accordingly.
- Obtaining a BIS ISI Mark certificate is not an easy task; however, there is no better place to obtain it than AN Global Services. We provide complete ISI Mark certification consultancy services from start to end, including all documentation formalities and coordination with BIS offices in India.
- AN Global Services has an experienced team of experts who assist in documentation, evaluation, examination, and other related processes.
- We are equipped with the necessary resources to conduct virtual pre-audits and on-site pre-audits, if required.
- If clients lack an in-house testing facility, we also assist them in setting one up.
- We coordinate with BIS-accredited laboratories for product testing.
- As a leading compliance service provider, AN Global Services assists in custom clearance of sample products.
- We ensure reliable and punctual service delivery and also visit BIS offices on behalf of clients, if required.
- We continuously invest efforts to meet the evolving requirements of BIS.
- In case of any concern, we assure you of providing the finest solution.
