News
NewUPCOMING QCO ON TEXTILE GOODS BY MINISTRY OF TEXTILENewCOTTON BALES – NEW QCO NOTIFICATIONNewUPCOMING QCOs ORDER FOR BIS CERTIFICATIONNewMANDATORY BIS CERTIFICATION FOR FASTENERSNewNEW INDUSTRIAL COMPLIANCE GUIDELINES ISSUEDNewUPCOMING QCO ON TEXTILE GOODS BY MINISTRY OF TEXTILENewCOTTON BALES – NEW QCO NOTIFICATIONNewUPCOMING QCOs ORDER FOR BIS CERTIFICATIONNewMANDATORY BIS CERTIFICATION FOR FASTENERSNewNEW INDUSTRIAL COMPLIANCE GUIDELINES ISSUED
AN Global Services Logo
BIS ISI Certification for Wrought Aluminium and Aluminium Alloy Wire IS 739

BIS ISI Certification for Wrought Aluminium, Aluminium Alloy Wire for General Engineering Purposes IS 739:1992

Wrought aluminium and aluminium alloy wires are widely used in general engineering applications due to their lightweight nature, high electrical conductivity, corrosion resistance, and excellent adaptability. These wires play an essential role in industries such as electrical and electronics, transportation, construction, and manufacturing.

Indian Standard IS 739:1992 specifies the requirements for wrought aluminium and aluminium alloy wires used for general engineering purposes. The standard covers important parameters such as wire diameter, mechanical properties, chemical composition, and performance requirements to ensure reliability in diverse industrial applications.

BIS ISI certification under IS 739:1992 confirms that aluminium wires comply with prescribed Indian safety and quality standards. Manufacturers are required to obtain a BIS license to use the ISI mark before manufacturing, importing, or selling these products in the Indian market.

IS 739:1992 – Key Technical Requirements for Aluminium Alloy Wires

  • (i) Requirements for wire diameter and dimensional tolerances
  • (ii) Chemical composition of aluminium and alloy materials
  • (iii) Mechanical properties including tensile strength
  • (iv) Surface finish and freedom from defects
  • (v) Wrapping test requirements for flexibility and durability
  • (vi) Electrical and physical performance characteristics
  • (vii) Sampling and testing procedures
  • (viii) Marking, packaging, and identification requirements

Overview of ISI Mark Certification for Aluminium Alloy Wires

IS 739:1992 applies to wrought aluminium and aluminium alloy wires used in general engineering applications such as electrical systems, manufacturing processes, structural applications, and industrial components. These wires must deliver consistent performance, durability, and resistance to environmental conditions.

The standard defines critical performance parameters including mechanical strength, chemical composition, dimensional accuracy, and surface quality. Compliance ensures that the wires are suitable for use in a wide range of engineering and industrial environments.

BIS ISI certification under the Product Certification Scheme (Scheme I) verifies that manufacturers meet the required quality control, testing capability, and production standards before the ISI mark is granted.

Process Required for BIS ISI Mark Certification for Aluminium Alloy Wires (IS 739:1992)

To obtain BIS ISI Mark Certification for wrought aluminium and aluminium alloy wires under IS 739:1992, manufacturers must follow the BIS Product Certification Scheme (Scheme I). This ensures compliance with Indian safety and quality standards before the product is introduced in the market.

Estimated Timeline: The BIS ISI certification process typically takes around 30 to 45 days for domestic manufacturers, depending on inspection scheduling and testing timelines. For foreign manufacturers, the timeline may extend due to additional compliance procedures.

Step-by-Step Certification Process

  1. Application Submission: Submit the BIS application via the Manak Online portal with product details, applicable standard (IS 739:1992), and manufacturing information.
  2. Testing Preparation: Ensure availability of testing facilities for tensile strength, chemical composition, wrapping test, and dimensional verification.
  3. Factory Inspection: BIS officials assess manufacturing infrastructure, production process, and quality control systems.
  4. Sample Testing: Product samples are tested in BIS-recognized laboratories as per IS 739:1992 requirements.
  5. Grant of BIS License: Upon successful inspection and testing, BIS grants the Certification Marks License (CM/L), allowing use of the ISI mark.

Requirements to Obtain BIS License for Wrought Aluminium and Aluminium Alloy Wire (IS 739:1992)

  • Compliance of aluminium and aluminium alloy wires with all technical and quality requirements specified under IS 739:1992.
  • Availability of appropriate testing facilities for tensile strength, chemical composition, dimensional verification, and wrapping test as required by BIS.
  • Appointment of qualified quality control personnel responsible for monitoring manufacturing processes and ensuring compliance.
  • Implementation of the Scheme of Inspection and Testing (SIT) prescribed by BIS.

To obtain BIS ISI Mark Certification for aluminium alloy wires under Product Certification Scheme-I, manufacturers must submit documents categorized as follows:

  • Administrative Details: Business registration, factory address proof, GST, and approvals.
  • Technical Details: Wire specifications, alloy composition, mechanical properties, and test parameters.
  • Quality Control Personnel: Qualification and experience of inspection personnel.
  • Commercial Details: Brand name, trademark, and authorization documents.

Cost of BIS ISI Certification for Aluminium Alloy Wire (IS 739:1992)

The following are indicative government charges for obtaining BIS ISI Certification under Scheme-I.

S. No.ParticularAmount (INR)Remarks
1Application Fee₹1,000Payable to BIS
2Inspection Fee₹7,000Payable to BIS
3Testing FeeAs applicableDepends on laboratory testing
4Marking FeeAs per actualAs per BIS norms

Note: Fees are indicative and subject to revision by BIS.

Benefits of Getting ISI Mark Certification for Aluminium Alloy Wire (IS 739:1992)

ISI certification for aluminium wires ensures compliance with Indian standards and enhances product acceptance across industries.

1. Compliance with Standards

Ensures conformity with IS 739:1992 requirements for mechanical and chemical properties.

2. Wide Industrial Usage

Certified wires are accepted in electrical, construction, and manufacturing sectors.

3. Reliable Performance

Testing ensures durability, conductivity, and structural integrity.

4. Enhanced Market Trust

ISI mark builds credibility among buyers and regulatory authorities.

5. Competitive Advantage

Helps in government tenders and large-scale industrial supply chains.

Frequently Asked Questions (FAQs) – BIS ISI Certification for Aluminium Alloy Wire (IS 739:1992)

1. Which standard applies to aluminium alloy wires?

IS 739:1992 applies to wrought aluminium and aluminium alloy wires.

2. Where are these wires used?

They are used in electrical systems, construction, transportation, and general engineering applications.

3. Is BIS ISI certification mandatory?

Yes, certification is mandatory as per applicable Quality Control Orders (QCO).

4. What tests are conducted?

Tests include tensile test, wrapping test, chemical composition, dimensional checks, and defect inspection.

5. How long does certification take?

The process generally takes around 30–45 days for domestic manufacturers.

CallWhatsApp