UPCOMING QCO ON TEXTILE GOODS BY MINISTRY OF TEXTILE
BIS ISI Certification for Wrought Aluminium and Aluminium Alloy Bars, Rods, Tubes, Sections, Plates and Sheets for Electrical Applications IS 5082:1998
Wrought aluminium and aluminium alloy products such as bars, rods, tubes, sections, plates, and sheets are widely used in electrical applications due to their good electrical conductivity, lightweight nature, and corrosion resistance. These materials are commonly used in power transmission, distribution systems, and electrical components.
Indian Standard IS 5082:1998 specifies the requirements for these products used in electrical applications. The standard defines chemical composition, mechanical properties, and electrical resistivity or conductivity requirements to ensure reliable electrical performance.
BIS ISI certification under IS 5082:1998 is mandatory for products covered under the relevant Quality Control Order (QCO). Manufacturers must obtain a BIS license before manufacturing, importing, or selling these products in the Indian market.
IS 5082:1998 – Key Technical Requirements for Aluminium Electrical Products
- (i) Chemical composition requirements of aluminium alloys
- (ii) Mechanical properties including tensile strength
- (iii) Electrical resistivity and conductivity requirements
- (iv) Dimensional accuracy and tolerances
- (v) Freedom from surface and internal defects
- (vi) Manufacturing processes such as extrusion and rolling
- (vii) Marking and identification requirements
- (viii) Inspection and testing procedures as per the standard
Overview of ISI Mark Certification for Aluminium Electrical Products
IS 5082:1998 applies to wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates, and sheets intended for electrical applications. These products are used in conductors, busbars, and other electrical components where conductivity and performance are critical.
The standard ensures that products meet specified requirements for electrical performance, mechanical strength, and dimensional accuracy. It also defines acceptable manufacturing and inspection practices to ensure consistency and reliability.
BIS ISI certification under the Product Certification Scheme (Scheme I) confirms compliance with IS 5082:1998. Manufacturers must establish adequate production facilities, testing capability, and quality control systems before obtaining certification.
Process Required for BIS ISI Mark Certification for Aluminium Electrical Products (IS 5082:1998)
To obtain BIS ISI Mark Certification under IS 5082:1998, manufacturers must follow the BIS Product Certification Scheme (Scheme I). The process ensures that products comply with all specified requirements before being marketed in India.
Estimated Timeline: The BIS ISI certification process generally takes around 30 to 45 days depending on inspection and testing timelines.
Step-by-Step Certification Process
- Application Submission: Submit application on BIS Manak Online portal with product details and IS 5082:1998 standard.
- Product Testing Preparation: Ensure testing facilities for chemical composition, tensile properties, electrical conductivity, and dimensional checks.
- Factory Inspection: BIS officials inspect manufacturing unit, production process, and quality control system.
- Sample Testing: Samples are tested in BIS-recognized laboratories as per IS 5082:1998.
- Grant of BIS License: After successful compliance, BIS grants CM/L license to use ISI mark.
Requirements to Obtain BIS License for Wrought Aluminium and Aluminium Alloy Products for Electrical Applications (IS 5082:1998)
- Compliance of aluminium products (bars, rods, tubes, sections, plates, and sheets) with chemical composition, mechanical properties, and electrical conductivity requirements as specified under IS 5082:1998.
- Availability of testing facilities for chemical analysis, tensile testing, electrical resistivity/conductivity testing, and dimensional verification.
- Appointment of qualified quality control personnel responsible for monitoring production processes and ensuring compliance with BIS standards.
- Implementation of the Scheme of Inspection and Testing (SIT) prescribed by BIS for maintaining consistent product quality and conformity.
To obtain BIS ISI Mark Certification for wrought aluminium and aluminium alloy products for electrical applications under Product Certification Scheme-I, manufacturers must submit documents categorized as follows:
- Administrative Details: Business registration documents, factory address proof, GST registration, and statutory approvals.
- Technical Details: Product specifications, alloy grades, dimensions, manufacturing processes (extrusion/rolling), and testing parameters as per IS 5082:1998.
- Quality Control Personnel Details: Qualification and experience of personnel responsible for inspection and testing.
- Commercial Details: Brand name, trademark details (if applicable), and authorization documents.
Cost of BIS ISI Certification for Aluminium Electrical Products (IS 5082:1998)
The following are indicative government charges involved in obtaining BIS ISI Certification under Product Certification Scheme-I. These fees are payable to BIS.
| S. No. | Particular | Amount (INR) | Remarks |
|---|---|---|---|
| 1 | Application Fee | ₹1,000 | Payable to BIS |
| 2 | Inspection / Audit Fee | ₹7,000 | Payable to BIS |
| 3 | Product Testing Fee | As applicable | Depends on product type and laboratory testing |
| 4 | Marking Fee | As per actual | As per BIS fee structure |
Important Note: Product testing as per IS 5082:1998 is mandatory before grant of license. BIS evaluates manufacturing capability, testing facilities, and quality control systems during certification.
Benefits of Getting ISI Mark Certification for Aluminium Electrical Products (IS 5082:1998)
ISI certification for aluminium products used in electrical applications ensures compliance with Indian standards and provides multiple advantages.
1. Assured Electrical Performance
Certification ensures compliance with electrical conductivity and resistivity requirements as per IS 5082:1998.
2. Regulatory Compliance
Products covered under applicable QCO must comply with BIS certification before being marketed in India.
3. Improved Market Acceptance
ISI-marked electrical aluminium products are widely accepted in power and electrical industries.
4. Enhanced Brand Credibility
The ISI mark enhances trust among utilities, contractors, and regulatory authorities.
5. Competitive Advantage
Certified manufacturers gain preference in electrical infrastructure projects and procurement.
Frequently Asked Questions (FAQs) – BIS ISI Certification for Aluminium Electrical Products (IS 5082:1998)
1. Which standard applies to aluminium products for electrical applications?
These products are covered under Indian Standard IS 5082:1998.
2. Is BIS ISI certification mandatory for these products?
BIS ISI certification is mandatory for products notified under the relevant Quality Control Order (QCO).
3. What tests are conducted under IS 5082?
Tests include chemical composition, tensile testing, electrical conductivity or resistivity, dimensional checks, and inspection for defects.
4. What is the validity of BIS license?
The BIS license is generally valid for one year and can be renewed.
5. How long does certification take?
The certification process typically takes 30 to 45 days.
